Возникли вопросы? Пишите на почту:
Моб. 066 695-34-37
Viber. 096 539-65-51

The Reasons Why the Oven on your Atlant Stove isn’t Working

Are you experiencing problems with the oven on your Atlant stove? If so, you’re not alone. The oven not working is a prevalent issue faced by many Atlant stove owners. Nonetheless, there’s no need to panic. In this article, we will provide helpful troubleshooting recommendations to help you diagnose and resolve common oven problems on your Atlant stove.

Important Things to Note

  • If your Atlant stove’s oven is not working, there are several possible reasons why.
  • Before jumping in technical troubleshooting, it’s important to ensure the power connection is secure.
  • Wrong settings and a dirty oven can also hinder the oven’s performance.
  • Checking the heating element and temperature sensor can help pinpoint any hardware issues.
  • If the problem persists, it’s best to seek professional assistance.

Confirm the Power Connection

If your oven is not turning on, the first and most essential step is to verify the power connection. A loose or damaged connection can cause your Atlant stove’s oven to break down.

To examine the power connection:

  1. Ensure the stove is properly plugged in and the outlet is functioning.
  2. Review the power cord for any visible damage or deterioration. If you notice any impairment, replace the cord quickly.
  3. Test the outlet by plugging in a separate appliance.
  4. If the outlet is not operational, check the circuit breaker and reset it if necessary.

Once you have verified the power connection, test your oven to see if it turns on. If the oven still does not turn on, move on to the next troubleshooting step.

Verify the Oven Settings

If your Atlant stove’s oven is not heating up enough, it can be due to erroneous settings. Verifying the oven settings is an essential step in troubleshooting the issue. Follow the steps below to ensure that your oven settings are accurate:

  1. Review the temperature and cooking time: Ensure that you have set the temperature and cooking time correctly on your oven. Confirm that the temperature you have set matches your recipe’s specifications.
  2. Analyze the oven illumination: Turn on the oven light and check if it illuminates. If it does not, it might indicate an issue with the oven’s power supply.
  3. Check the baking mode: Confirm that the oven is in baking mode. If it is in self-cleaning mode, the oven might not warm up properly.
  4. Inspect the door seal: Check if the door gasket is impaired or worn out. A flawed gasket can cause the oven to lose warmth and not heat up properly.

Confirming the oven settings can solve the issue of the oven not heating up on your Atlant stove. Nonetheless, if the problem endures, proceed to the next section for further troubleshooting.

Analyze the Heating Element

If you have determined that the oven is not warming properly on your Atlant stove, the heating element may be the culprit. The heating element is accountable for producing the warmth that cooks your food. Over time, the heating element can wear out or become damaged, leading to a decline in performance.

To analyze the heating element of your Atlant stove, follow these steps:

  1. Turn off the power to the stove by disconnecting it or turning off the circuit breaker.
  2. Locate the heating element at the bottom of the oven. It should be a visible metal coil.
  3. Inspect the heating element for any traces of injury, such as cracks or breaks. If you remark any injury, the heating element will need to be supplanted.
  4. If there is no visible injury, use a multimeter to authenticate the heating element for integrity. This will define if the heating element is functioning accurately or not.

If the heating element is faulty, it will need to be substituted. This is best done by a veteran to guarantee precise assembly and avoid any safety hazards. Reach out to a eligible oven repair service for help with swapping the heating element on your Atlant stove.

Note: It is vital to guarantee that the power is turned off before inspecting or handling the heating element of your stove to circumvent any electrical risks.

Authenticate the Temperature Sensor

One of the common reasons why the oven of your Atlant stove may not be getting sufficiently hot is a defective temperature sensor. The temperature sensor is accountable for regulating the oven temperature, and if it is not operating precisely, it can cause the oven to break down.

To diagnose if the temperature sensor is the issue, you’ll need to evaluate it for any visible signs of injury or deterioration. You can commonly find the temperature sensor at the back of the oven, near the broiler-element. Verify the sensor’s status, and if it appears damaged, it will need to be replaced.

You can use a multimeter to test the defiance of the temperature sensor. With the oven unplugged, detach the temperature sensor from its stance and disconnect it from the wiring harness. Set the multimeter to the Rx1 setting and make contact the probes to the sensor’s connectors. A properly operating temperature sensor should have a resistance of roughly 1100 ohms at room temperature. If the defiance level is considerably different, this is an indication that the temperature sensor is flawed and needs to be substituted.

If you are unsure if the temperature sensor is the issue, it is best to get in touch with a professional for aid with analyzing the problem and restoring your Atlant stove’s oven. A authorized repair technician has the expertise to identify fundamental issues and provide dependable oven repair services.

Clean the Oven

A dirty oven can not only degrade its performance but also lead to various health hazards. If you’re experiencing issues with your Atlant stove’s oven not heating up, it’s vital to inspect and clean it frequently.

Before you begin cleaning the oven, ensure that it is disconnected and cooled down to avoid any wounds or ruin.

DIY Oven Cleaning Method

You can follow these uncomplicated steps to clean the oven:

  1. Eliminate all the racks and platters from the oven.
  2. Mix baking soda and water to form a paste and apply it on the inner faces of the oven.
  3. Let the paste sit for at least 30 minutes or overnight if the stains are too stubborn.
  4. Using a damp cloth, wipe off the mixture and leftovers from the oven.
  5. If there are still remaining stains, mix equal parts of water and vinegar and Click Webpage vaporize it on the surface.
  6. Use a pristine cloth to remove the vinegar solution and let the oven dry completely before using it again.

Regularly cleaning your Atlant stove’s oven can ensure that it warms up accurately and is free from any poisonous bacteria or germs.

“A clean oven is not only a contented oven, but it is also a healthy one.”

Reset the Circuit Breaker

If your Atlant stove’s oven is not turning on, it could be due to a tripped circuit breaker. To reset the circuit breaker, follow these steps:

  1. Locate your circuit breaker box. This is usually found in the basement or amenity room.
  2. Identify the breaker that controls your stove’s oven.
  3. Turn the breaker off and then back on.
  4. Wait a few minutes and then try turning on your oven again.

If the oven still does not turn on, it may be an issue with the cabling or electrical elements of your Atlant stove. It is advised to seek veteran assistance from a qualified practitioner for repair.

Contact Professional Assistance

If none of the troubleshooting suggestions mentioned above have deciphered the issue with your Atlant stove’s oven, it is best to seek professional aid for repairs. Attempting to fix the issue yourself may cause additional ruin to the oven, culminating in amplified repair costs. Professional repair services have the necessary mastery and implements to diagnose and fix compound issues with your Atlant stove’s oven.

When opting a professional repair service, it is recommended to select for a reputable and seasoned company. Look for reviews and recommendations online, and enquire about the company’s authorizations and licenses before making a decision. A reliable repair service will provide you with an estimate of the repair costs and keep you informed throughout the repair process.

Remember, regular conservation and timely repairs can ensure the proper operation of your Atlant stove’s oven. Disregarding small issues can lead to grave problems and expensive repairs in the prolonged run. So, take care of your appliance and seek veteran aid whenever needed.


In finish, discovering that the oven of your Atlant stove does not work can be dismaying, but it is not the end of the world. By following the troubleshooting suggestions provided in this article, you can diagnose and decipher mutual issues with your oven.

If the problem persists, don’t falter to seek veteran aid for Atlant stove oven repair services. It is imperative to ensure the proper operation of your oven, and a professional technician can give you the peace of mind you need.

Remember that regular conservation, such as cleaning the oven, can help keep it in good condition and prevent any issues that may arise. So, take the time to keep your Atlant stove’s oven in top shape, and you’ll be able to enjoy all the gains it can provide for years to come.

Добавить комментарий